Instructions

Single Color Screen Print Transfer Instructions

Temperature: 325 Degrees Fahrenheit

Time: 10 Seconds

Pressure: High Pressure

Peel: Hot Peel

Fabric Type: 100% Cotton, 100% Polyester, or a Cotton/Poly Blend

*NO TEFLON SHEETS, COVERS or PILLOWS NEEDED

WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

Thin Matte Film Transfer Instructions

Temperature: 320-325 Degrees Fahrenheit

Time: 10-15 Seconds

Pressure: Heavy Pressure

Peel: Hot Peel

Fabric Type: 100% Cotton, 100% Polyester, or Cotton/Poly Blend

*Please note the time and temp are suggested and you may have to adjust based on your own presses best settings.

WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

DTF Transfer Instructions: Place Image Face Up

Temperature: 320-325 Degrees Fahrenheit

Time: 10-15 Seconds

Pressure: Heavy Pressure

Peel: Cold Peel

Fabric Type: 100% Cotton, 100% Polyester, or Cotton/Poly Blend

*Please note the time and temp are suggested and you may have to adjust based on your own presses best settings.

WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

Instructions

Trim The Wrap: Trim excess where needed.

Peel: Use squeegee on the wrap before peeling to remove air. Peel the white backing off.

Place: Once it touches the glass it cannot be removed. Line up straight before placing. Start at one spot, roll to the side to stick, then roll to the other side.

Rub: Rub evenly with squeegee or hands, rubbing a few times over so that the decal adheres evenly.

Peel: Peel the clear film slowly. If part of the decal starts to peel up, replace the clear film and rub again for best adhesion. Peel at an angle for easier removal.